Case

Obviously a popular design style, used for most general purpose case layouts and usually carried as a briefcase 
- Hinged Lid
- Catches to front
- Handle to front

Pilot Case

As the title explains, based on the familiar style used by airline pilots. This style also finds many other uses
 - Hinged Lid
- Catches to front
- Handle to top

Hand Trunk

Similar to ‘Case’, but usually deeper and a two handed carry.
 - Hinged Lid
- Catches to front
- Handle to each end

Trunk

General purpose trunk is a popular choice for many applications. Position and quantity of handles can vary to suit individual requirements.
- Hinged or Removable Lid
- Catches to front (& Rear)
- Handle to each end

Top-Hat Trunk

Used for larger or heavy equipment to assist removal from a low split base. Again, position and number of handles can vary.
 - Removable Large Lid
- Catches to front & Rear
- Handles to each end (or, all round)

Combination Trunk

A split bodied trunk particularly suited to housing two pieces of equipment, one in the base and one above (on a false base).
 - Removable Lid & Mid Section
- Catches to front & Rear
- Handle to each end (or, all round)

Split Lid Trunk

Used for taller or heavy equipment to assist removal from a low split base. Split lids are easy to remove. Position and number of handles can vary.
 - Removable split Lids
- Catches to Front, Ends & Rear
- Handles all round

Speaker Trunk

A Top - Hat trunk with a central divider, designed to house speaker cabinets. Position and number of handles can vary.
 - Removable Lid
- Catches to Front & Rear
- Handle to each end (or, all round)

Plasma Trunk

Used for the most widely available Plasma screens and accessories. Low base to aid removal.
- Removable Lid
- Catches to front & Rear
- Handles all round

Shockmounted Rack

Rubber shock absorbing mounts fitted to an internal plywood inner rack ensure maximum equipment protection . Handle positions can vary to suit size.
 - Removable Lids
- Catches to Lids
- Handle to sides

Rack-in-a-Box

Removable Plywood inner rack housed in a flight case.
- Removable Lid
- Catches to Lid
- Handle to sides

Foam Suspended Rack

Inner plywood rack surrounded by polyethylene foam is an ideal choice for audio processing equipment. Handle positions can vary to suit size.
 - Removable Lids
- Catches to Lids
- Handle to sides

Rack Box

Similar to Rack but having a single lid. Finds many uses
 - Removable Single Lid
- Catches to lid
- Handles to sides

Mixer Rack

Multi-pivoting top section for mixers. Single or twin lids, ideal for karaoke and DJ’s. Handle positions can vary to suit size.
 - Removable Lids
- Catches to lids
- Handle to sides

Mixer

Supplied with or without Loom Box to rear. Foam blocked to suit individual consoles. Position and number of handles can vary
  - Removable Lid
- Catches to front, rear & ends
- Handles all round

Nosecone Mixer

As Mixer but with a front Nosecone lid. Suits larger mixing consoles.
 - Removable Lids
- Catches to lids
- Handle to sides

Multicore Trunk

Twin guide posts fitted to the base assist figure of eight winding.  Option for cable outlet flaps are available.  Position and number of handles can vary.
 - Hinged Lid
- Catches to Front
- Handles all round